Configuring a Core 3 (C3) Tracker Archives

You are here:

KB Home
Software
HT Pro
Configuring a Core 3 (C3) Tracker

Configuring a Core 3 (C3) Tracker

October 4, 2021

Device Compatibility Configuration of a Core 3 (C3) device is done using a dedicated section found in the HT Pro client software. Only C3 devices (and older) may be configured within HT Pro. For newer devices, such as C5 trackers, configuration must be done in HT Management Console. Se...

Commands

September 28, 2021

This section of the Core 3 (C3) configuration contains a list of commands and settings related to the device receiving commands from the HT Server software. Log: this instruction will cause the tracker to completely clear its internal log of all stored messages. If there is a large q...

Phone and Serial Numbers

September 29, 2021

This section of the Core 3 (C3) config contains phone numbers used by the tracker for sending messages, and its unique serial number. SMS: this setting is the phone number to which the tracker will send an SMS text message if needed (such as, for example, if an alarm message must be sent but...

TCP Settings

September 29, 2021

This section of the Core 3 (C3) config contains the settings used by the tracker to utilize internet data with its SIM card, and connect to HT Server. Main Settings This page relates to the SIM card installed within the tracker, and using it to connect to HT Server. APN, User and ...

Alarm Protocol

September 29, 2021

This section of the Core 3 (C3) config contains the settings that control which connection methods the tracker should use to transmit to HT Server. By default, a tracker will use an available TCP connection in order to transmit messages to HT Server (see TCP Settings). This page determines ...

Configuring a Core 3 (C3) Tracker